E-Slots allow you to run tapewire from floor to floor without extra connections.
Connecting to the cellar power is easiest using this E-slot and runing the Main Loop before attaching the foundation Here's a slideshow.
The most trouble-free connection uses an E247 Jack with a connection wire to the tapewire in the cellar.
Here's a slideshow
You can also connect power in the cellar to tapewire by drilling thru the Base Floor after assembly:
Here's a slideshow
Use the Middle Floor to locate the E-slot (or the stair hole if that's where you will be running the tapewire) E-slot/E-Slot_80.png
Small cuts- peel the waste away so it doesn't drag on the knife
E-slot/E-Slot_84.png
